LOCTITE Email
Pst Pipe Sealant #567 250 Ml - Tube High-temp For Stainless
Item #2502087069
MFR #2087069
UNSPSC # 31200000
Shipping Weight0.316600 lbs
CA$107.50 / EA
CA$0.00
Off-white, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3”. UL approved.
LOCTITE® 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3”. It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280,000 - 800,000 mPa·s and service temperature -55 to +150ºC. UL approved.
- Provides an instant low pressure seal
- Doesn’t creep, shrink or block systems
- Single component - clean and easy to apply
- Thixotropic and high/very high viscosity
- UL approved
Item Thread Sealant High Temp
Container Type Tube
Size 250mL
Container Size 250 ml
Standards KIWA GASTEC QA AR 214, NSF/ANSI 61 Certified, UL MH8007, ULC MH27131 Classified
Application General Purpose Instant Thread Sealant
Application Temp. Range -65 Degrees F - 450 Degrees F
VOC Content 0.13%
Begins to Harden 30 min.
Colour Off-White
Chemical Type Methacrylate Ester
Maximum Operating Temperature 400°F
Colour Off-white
For Material Type Aluminum, Metal, Stainless Steel, Steel
Chemical Base Methacrylate Ester
Storage Requirements 8° to 21°C, Dry Location
Cure Type Anaerobic
Flash Point 93 Degrees C
For Use With 7471(TM) and 7649(TM) If Needed
Full Cure 24 hr.
Gas Pressure Range 10,000 PSI
Series 567
Liquid Pressure Range 10,000 PSI
Performance Temp. Range -65 Degrees F - 450 Degrees F
Standards NSF/ANSI-61 Certified
Strength Low
Item Thread Sealant
Specific Gravity 1.1
Maximum Viscosity 540,000 cP
Viscosity 280,000 to 800,000 cP
Flash Point >212°F
Minimum Operating Temperature -65°F
Specific Sealing Application Pipe Sealing, Thread Sealing
Dangerous Goods Yes
Unspsc 31200000