Cart
LOCTITE

Thread Sealant 567 Pst - High Temp 50ml Tube

Item #2502087067
MFR #2087067
UNSPSC # 31200000
Shipping Weight0.072600 lbs
Safety Data Sheet
Dangerous Goods
CA$30.59 / EA
CA$0.00

Off-white, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3”. UL approved. 

LOCTITE® 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3”. It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280,000 - 800,000 mPa·s and service temperature -55 to +150ºC. UL approved.

  • Provides an instant low pressure seal
  • Doesn’t creep, shrink or block systems
  • Single component - clean and easy to apply
  • Thixotropic and high/very high viscosity
  • UL approved

Item Thread Sealant High Temp

Container Type Tube

Size 50 mL

Container Size 50 ml

Standards KIWA GASTEC QA AR 214, NSF/ANSI 61 Certified, UL MH8007, ULC MH27131 Classified

Application General Purpose Instant Thread Sealant

Application Temp. Range -65 Degrees F - 450 Degrees F

VOC Content 0.13%

Begins to Harden 30 min.

Colour Off-White

Chemical Type Methacrylate Ester

Maximum Operating Temperature 400°F

Colour Off-white

For Material Type Aluminum, Metal, Stainless Steel, Steel

Chemical Base Methacrylate Ester

Storage Requirements 8° to 21°C, Dry Location

Cure Type Anaerobic

Flash Point 93 Degrees C

For Use With 7471(TM) and 7649(TM) If Needed

Full Cure 24 hr.

Gas Pressure Range 10,000 PSI

Liquid Pressure Range 10,000 PSI

Performance Temp. Range -65 Degrees F - 450 Degrees F

Specific Gravity 1.15

Standards NSF/ANSI-61 Certified

Strength Low

Item Thread Sealant

Viscosity 280,000 to 800,000 cP

Flash Point >212°F

Minimum Operating Temperature -65°F

Dangerous Goods Yes

Unspsc 31200000

Dangerous GoodDangerous Good
Safety Data Sheet (SDS)Safety Data Sheet (SDS)
Search engine powered by ElasticSuite